St. Cloud, FL Questions
St. Cloud FL Concrete Questions and Answers
Plain answers on what concrete work costs around St. Cloud in 2026, which jobs need a City or county permit, how the Florida Building Code treats slabs next to a house, and how sand, heat and the rainy season change a pour.
How much does a concrete driveway cost in St. Cloud FL?
Most Orlando-area concrete driveway jobs, St. Cloud included, land between $2,700 and $14,500 including tear-out of the old one, with an average of $6,490 and $5 to $21 per square foot (Angi, 2026). A plain two-car driveway of about 480 square feet models at $2,590 to $6,520 with 4 inch mesh-reinforced concrete (concreteslabcost.com, October 2026). Removal of an old slab, a thicker apron at the street and decorative finishes push a quote up. Quotes vary by site.
Do you need a permit to pour concrete in St. Cloud, Florida?
Often, yes. Inside city limits a new concrete pad is a residential permit with a $60 base fee in the City's 2026 schedule, and any driveway work in the right-of-way needs a Public Works permit ($110, plus $30 per curb cut and $100 for the driveway inspection). Outside city limits, Osceola County requires a driveway permit for any new or widened residential driveway. Single-family jobs under $7,500 can request an exemption unless the work is structural or the lot is in a flood hazard area.
How thick should a concrete driveway be in Florida?
Four inches is the common residential thickness for cars, and 5 inches is the usual step up where trucks or RVs park. In unincorporated Osceola County the part of the driveway between the road and the right-of-way line has to be 6 inches thick with wire mesh or fiber mesh throughout, under the county's road construction specifications. Ask the City of St. Cloud's Public Works office for its own apron detail before pouring inside city limits.
When is the best time of year to pour concrete around St. Cloud?
October through May is the easier window. The National Weather Service office in Melbourne puts the median start of Orlando's wet season at May 24 and its end at October 15, and those five months bring about 61 percent of the year's rain. Summer pours still happen, usually early in the morning, with the forecast checked for afternoon storms and the slab kept damp while it cures.
Does a new concrete slab need termite treatment in Florida?
Slabs that are part of a building do. The Florida Building Code requires termite protection for new construction, and when soil treatment is the method, it also has to go under any exterior concrete within 1 foot of the house walls, which covers patios and walks poured against the house. A licensed pest control company treats the soil and files a certificate of compliance with the building department.
How long before you can drive on a new concrete driveway?
About seven days for cars. Concrete Network notes a new driveway reaches roughly 70 percent of its strength in that time, and recommends waiting at least 28 days before parking an RV or a heavy truck on it. In summer heat the surface is kept damp while it cures, so the top doesn't dry out ahead of the slab underneath.
Where does St. Cloud Pro Concrete work?
St. Cloud and the parts of Osceola County east and north of it: Harmony, Narcoossee and the Narcoossee Road corridor, Ashton and the rural lots out toward Holopaw. Inside city limits the City of St. Cloud issues permits; everywhere else, Osceola County does.
What finish is best for a Florida concrete driveway?
A broom finish for most driveways: the fine ridges give grip when the concrete is wet from a storm or a sprinkler, and it costs the least to pour and maintain. Stamped and exposed-aggregate finishes look richer but cost more, $9 to $30 per square foot for stamped work in the Orlando area (Angi), and need sealing every few years.
What concrete work does this company not take on?
St. Cloud Pro Concrete sticks to poured concrete: driveways, patios, stamped concrete, pool decks and coatings, slabs and pads. Paver installation, asphalt paving, foundation repair, slab lifting and pool interiors (plaster and tile) are other trades and aren't offered.
Who do I call about a driveway in the right-of-way in St. Cloud?
The City of St. Cloud's Public Works department, which issues right-of-way permits through its Civil Engineering division. It is at 3101 Progress Lane and on 407-957-7269. Building permits for slabs and pads go through the City's Building, Codes & Licensing office at 1300 Ninth Street.
Is a St. Cloud address always inside city limits?
No. Many homes with a St. Cloud mailing address are in unincorporated Osceola County, where the county issues permits and its 24 foot driveway width cap applies. Check the property record or ask the permit office before applying.
How much concrete does a typical patio need?
A 4 inch slab takes about 1.23 cubic yards per 100 square feet, so a 16 by 20 foot patio needs a little under 4 cubic yards before waste. The concreteslabcost.com model lists 4.94 cubic yards for a 20 by 20 foot slab at 4 inches.
Go deeper: driveway cost, slab cost, pad cost, St. Cloud permits, Osceola County permits, termite pretreatment, sandy soil, rain and heat and pavers vs concrete. Areas covered: service area.
Still have a question?
Ask it in the quote form along with the address. The quote is free.